DLI LPC9 Скачать руководство пользователя страница 6

Страница: 6 / 81

4 Basic setup and use

Basic setup and use

4.1

Factory defaults

The factory default network configuration is as follows:

• wired network: fixed IP address 192.168.0.100, netmask 255.255.255.0;

• wireless network: fixed IP address 192.168.254.1, netmask 255.255.255.0.

You can log in with username

admin

(lower case) and password

1234

. It is recommended that you change the

password. You will be reminded to do so by a big red banner on the top of each page.

To reset to factory defaults, gently press the reset-to-defaults button below the LCD to enter the reset menu, then
select a reset option.

4.2

Initial setup

Use these shortcuts if you are an experienced installer. We recommend reading the entire manual for first-time
installation.

• Unpack. Save the carton.

• Attach the power cord.

• Attach an Ethernet cable from the controller to your LAN. Switch power on. If you are attached through a

switch, you may need to cycle switch power to establish a connection.

• Ping the default address 192.168.0.100 to confirm that a network connection is established. If you don't

receive a response, proceed to the

IP setup

section below.

• Log in to the power controller using the default user name admin and the password 1234. Note: "admin" must

be entered in lower case.

• Click the Settings link to reach the configuration page. Select the safest power-loss configuration for your

installation: all OFF, all sequential ON or pre-powerloss state.

• Configure the power switch as described below. After each change, click Submit and wait for the page to

refresh before continuing.

Tip: A three-bulb electrical safety-tester is handy for configuring the controller before attaching your equipment.

4.3

IP setup

If your network settings won't access the default IP, use a direct cable connection (temporarily bypass any switch or
router) and follow these steps to add a compatible static IP, such as 192.168.0.50.

4.3.1

Windows IP setup

Before adding an IP, close all programs and browsers. After the link is established, you can enable DHCP.

DLI LPC9 User’s Guide: 1.7.24.0

Содержание LPC9


















































































Результаты поиска

Содержание LPC9

Отзывы:

Похожие инструкции для LPC9

Бренды по названию

Популярные бренды

DLI LPC9, Руководство пользователя

Результаты поиска

Содержание LPC9

Отзывы:

Похожие инструкции для LPC9

Бренды по названию

Популярные бренды