manualshive.com logo in svg

DKL L2-S300, Руководство по эксплуатации, Страница: 291 / 327

Поделиться
Скачать
DKL L2-S300 Скачать руководство пользователя страница 291

4 

9000-606-39/30  1709V004 

Important information

2.8  Only use genuine parts

 

i

Only use Dürr Dental parts or accessories and 
special accessories specifically approved by 
Dürr Dental� 

 

i

Only use only genuine working parts and 
spare parts�

DÜRR MEDICAL accepts no liability for 
damages or injury resulting from the use 
of non-approved accessories or special 
accessories, or from the use of non-gen-
uine working parts or spare parts�
The use of non-approved accessories, 
special accessories or non-genuine 
working parts / spare parts (e�g�  mains 
cable) can have a negative effect in terms 
of electrical safety and EMC�

2.9  Transport

The original packaging provides optimum pro-
tection for the device during transport�
If required, original packaging for the unit can be 
ordered from Dürr Dental�

Dürr Dental does not accept any respon-
sibility or liability for damage occurring 
during transport due to the use of incor-
rect packaging, even where the unit is 
still under guarantee�

 

i

Only transport the device in its original pack-
aging�

 

i

Keep the packing materials out of the reach of 
children� 

2.10 Disposal

The unit may be contaminated� Instruct 
the company disposing of the waste to 
take the relevant safety precautions�

 

i

Decontaminate potentially contaminated parts 
before disposing of them�

 

i

Uncontaminated parts (e�g� electronics, plastic 
and metal parts etc�) should be disposed of in 
accordance with the local waste disposal reg-
ulations�

 

i

If you have any questions about the correct 
disposal of parts, please contact your dental 
trade supplier�

2.5  General safety information

 

i

When operating this device always observe all 
guidelines, laws, and other rules and regula-
tions that are applicable at the site of opera-
tion�

 

i

Prior to each use, check condition of the de-
vice and make sure it is in perfect working or-
der�

 

i

Do not convert or modify the units� 

 

i

Observe the Installation and Operating In-
structions� 

 

i

Make the Installation and Operating Instruc-
tions available to the person operating the de-
vice at all times�

2.6  Qualified personnel

Operation

Persons who operate the units must ensure safe 
and correct handling based on their training and 
knowledge� 

 

i

Instruct or have every user instructed in han-
dling the unit� 

Installation and repairs

 

i

Installation, readjustments, alterations, up-
grades and repairs must be carried out by 
Dürr Dental or by qualified personnel specifi-
cally approved and authorized by Dürr Dental� 

2.7  Protection from electric shock

 

i

When working on the units observe all the rel-
evant electrical safety regulations� 

 

i

Never touch the patient and unshielded plug 
connections on the device at the same time� 

 

i

Immediately replace any damaged lines and 
connections� 

Observe the EMC rules concerning medical 
devices

 

i

Observe specific precautionary measures re-
lating to electromagnetic compatibility (EMC) 
for medical devices, see "13 Information 
about EMC in accordance with 
EN 60601-1-2"�

EN

Содержание L2-S300








































































































































































































































































































































Отзывы:

Нет отзывов