DKL L2-S300 Скачать руководство пользователя страница 120

Страница: 120 / 327

Skilled application

The medical device is intended only for skilled application according to the intended use as well as in compliance

with the valid health and safety at work regulations, the valid accident prevention regulations and in compliance with

these Instructions for use.

The medical device should be prepared for use and maintained by staff who have been trained in procedures for

infection control, personal safety and patient safety.

Improper use, unauthorized assembly, modification or repair to the medical device, non-compliance with our

instructions or the use of accessories and spare parts which are not approved by W&H, invalidates all claims under

warranty and any other claims.

Содержание L2-S300








































































































































































































































































































































Результаты поиска

Содержание L2-S300

Отзывы:

DKL L2-S300, Руководство по эксплуатации, Страница: 120 / 327

Результаты поиска

Содержание L2-S300

Отзывы: