DKL L2-S300 Скачать руководство пользователя страница 133

Страница: 133 / 327

Cleaning agents and disinfectants

> Read the notes, follow the instructions and heed the warnings provided by the manufacturers of cleaning

agents and/or disinfectants.

> Use only detergents which are intended for cleaning and/or disinfecting medical devices made of metal

and plastic.

> It is imperative to comply with the concentrations and exposure times specified by the manufacturer of

the disinfectant.

> Use disinfectants which have been tested and found effective by the Verbund für Angewandte Hygiene e.V.

(VAH = Association for Applied Hygiene), the Österreichischen Gesellschaft für Hygiene, Mikrobiologie

und Präventivmedizin (ÖGHMP = Austrian Society for Hygiene, Microbiology and Preventive Medicine),

the Food and Drug Administration (FDA) and the U.S. Environmental Protection Agency (EPA).

The user is responsible for validating its process if the specified cleaning agents and disinfectants are

not available.

Содержание L2-S300








































































































































































































































































































































Результаты поиска

Содержание L2-S300

Отзывы:

DKL L2-S300, Руководство по эксплуатации, Страница: 133 / 327

Результаты поиска

Содержание L2-S300

Отзывы: