DKL L2-S300 Скачать руководство пользователя страница 119

Страница: 119 / 327

Qualifications of the user

We have based our development and design of the medical device on the dentists, dental hygienists, dental

employees (prophylaxis) and dental assistants target group.

Production according to EU Directive

The medical device meets the requirements of Directive 93/42/EEC.

Responsibility of the manufacturer

The manufacturer can only accept responsibility for the safety, reliability and performance of the medical device

when it is used in compliance with the following directions:

> The medical device must be used in accordance with these Instructions for use.

> The medical device has no components that can be repaired by the user.

> Modifications or repairs must only be undertaken by an authorized W&H service partner (see page 47).

> Unauthorized opening of the medical device invalidates all claims under warranty and any other claims.

Содержание L2-S300








































































































































































































































































































































Результаты поиска

Содержание L2-S300

Отзывы:

DKL L2-S300, Руководство по эксплуатации, Страница: 119 / 327

Результаты поиска

Содержание L2-S300

Отзывы: