DKL L2-S300, Руководство по эксплуатации, Страница: 21 / 327

21
Moving the Treatment Chair
Manually Extractable Double-Jointed Head Rest
Pull the release lever up to freely adjust the
double-jointed head rest. Press the lever down to fi x the
position of the double-jointed head rest. The release
lever must always be pulled up completely to move the
head rest.
Programme Run
Press the programme keys “0” and “lp” simultaneously for about 3 seconds until you hear
a signal tone. The treatment chair then moves the seat and the back rest into the lowest
position. The motion sequence has been reset now.
Once an instrument has been activated, the treatment chair cannot be moved any more.
The treatment chair can optionally be equipped with
arm rests. The arm rest on the assistant’s side is fi rmly
screwed on. The arm rest on the doctor’s side can be
removed by loosening the two knurled screws on the
back of the back rest.
Emergency-Stop System
Briefl y tap the joystick or any programme key at the back rest to stop the active program-
me immediately. For this purpose, you can also press the start button for the instruments
at the foot controller.
You can fi nd an application fi lm at www.youtube DKL Germany.
Video: DKL CHAIRS L2 SERIES FUNKTIONEN TREATMENT CHAIR POSITIONS
LINK: https://youtu.be/qzRuFbGAuA0