DKL CHAIRS L2-ECO, Руководство по эксплуатации

Страница: 39 / 266

39
Cleaning and Disinfection of the Instrument Holders
Marking Type of holder
GS Spray mist suction
KS Saliva ejector
T Turbine connection
M Micromotor
S Function syringe
• Pull out the instrument holder
• Rinse off any soiling with water
• Remove any residual liquid (absorbent cloth; blow dry with
compressed air)
• Disinfection with disinfectants; wipe disinfection is
recommended.
• Observe the disinfectant manufacturer’s instructions for use
• After manual cleaning and disinfection, a steam sterilization
(packaged) in a steam sterilizer class B or S (in accordance
with EN 13000) is necessary.
• Remove any soiling on the instrument panel with a damp
cloth.
• Remove any residual liquid (absorbent cloth; blow dry with
compressed air)
• Disinfection of the instrument panel with disinfectants; wipe
disinfection is recommended.
• Observe the disinfectant manufacturer’s instructions for use
• Put the instrument holders back into their respective positions.
The supply tubes are not approved for mechanical cleaning (thermo washer
disinfector) and sterilization. Do not twist or fold the supply tubes! Do not roll up the
tubes too tightly!
The return air fi lter for the turbine connection must be checked regularly for oil residues.The return air
fi lter is located at the end of the tube below the doctor‘s device.
If oil residues have accumulated in the return air fi lter, proceed as follows:
1. Twist off the return air fi lter anti-clockwise at
the end of the tube.
2. Dispose of oil residues and fi lter fl oss
properly.
3. Clean the container and replace the fl oss
fi lter insert.
4. Twist off the return air fi lter at the end of the
tube.
Cleaning the Turbine Return Air Filter