v.200601
En.11
ENGLISH
OPERATING INSTRUCTIONS
3.
Pull backward on the brass chuck ring (fig.8, 1), insert the nozzle adapter
with multi-spray nozzle into the short wand (fig.8, 2) and release the chuck
ring.
4. If it is more convenient to position yourself further from the spray nozzle or
you require a longer reach, insert the longer extension wand (fig.9, 1) into the
pressure wash unit and turn it clockwise until it is fixed in place (fig.9, 2).
5.
Following that, add the short wand (fig.10) before finally inserting the nozzle
adapter with multi-spray nozzle into the short wand as in fig 8 above.
ADD THE INTAKE HOSE
1.
Pulling back on the connector’s outer sleeve (fig.11, C),
push the hose connector onto the inlet of the pressure wash unit (fig.12, P)
.
Release the outer sleeve.
