v.200601
En.3
ENGLISH
IMPORTANT SAFE OPERATING PRACTICES
CAUTION: SAFETY FIRST—
Read this manual carefully before
operating your tool. We recommend that you read this manual
completely so that you are fully aware of all important safety
recommendations. Record your serial number.
To use this tool properly, you must observe the safety regulations, the assembly
instructions and the operating instructions to be found in this manual. All persons
who use and service the tool must be informed about its potential hazards and
must be acquainted with this manual. Children should be supervised at all times
if they are in the area in which the tool is being used. It is also imperative that
you observe the accident prevention regulations in force in your area. The same
applies for general rules of occupational health and safety.
CALIFORNIA PROPOSITION 65
WARNING:
This product can expose you to chemicals including DEHP,
which is known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to www.P65Warnings.
ca.gov.
GENERAL
WARNING!
Read all safety warnings instructions, illustrations and
specifications provided with this battery powered tool. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious
injury. The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or your battery-operated (cordless) power tool. Read your
owner’s manual carefully. Get to know your tool and familiarize yourself with
its applications and limitations.
1. Use the tool according to the guidelines in this manual. Do not abuse it or
force it to do a job for which it was not designed.
2. Use only original equipment parts and accessories. Consult the owner’s
manual. The use of incorrect accessories may produce unforeseen hazards.
WARNING:
Make no attempt to assemble and operate the tool until you
have thoroughly read this manual and completely understood its contents.
Operating your DK2 tool improperly can result in serious personal injury
and/
or damage to both tool and vehicle. Since Detail K2 Inc. does not complete
its assembly or installation, we cannot be held responsible for any personal
injury or damages that product misuse may produce.
WORK AREA SAFETY
1. Keep work area clean and well lit. Cluttered and dark areas invite accidents.
2. Do not operate battery powered tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
1. Battery charger plugs must match the outlet. Never modify the plug in any
way. Unmodified plugs and matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
3. Do not expose battery powered tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the charger. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
