dixell xweb 5000, Руководство по эксплуатации, Страница: 106 / 115

XWEB5000 Operation Manual
106/115 1592010600
System release is the number after the letter “V”. In the above image is displayed XWEB v.4.0
3.10.2 SYSTEM UPDATE
One of the most important features of XWEB is the possibility to update the system via internet (network
access or dial-up). Update procedure is divided into 2 main steps. First step makes an internet connection
and tries to reach a remote host to begin the download of the new data. Of course the very first action is to
compare local XWEB system release to the one available on the remote host. If every modules are the same
on both side, no download starts. On the contrary only the module needed is download. The second step is a
completely automatic local procedure that update the software. Beware if a power loss occurs during this
procedure, the system may fault to re-start.
To start the update procedure please go to “Information” roll-down menù and choose “Update”.
This window will appear, of cou
rse push “Yes” button to start the procedure.
Please beware that if you use a network with a valid gateway, turn off the “dial-up” if it is active. On the
contrary if in your network there is no gateway, it means you have no internet access, you have to set-up a
proper “dial-up” connection (see “§2.2.4 System “).
A counter shows you the current module download status, please be patient. At the end of the procedure a
message box informing you about the status of the update will appear: