dixell xweb 5000, Руководство по эксплуатации

Страница: 49 / 115

dIXEL
Manual de operare Xweb5000
Pag. 49 / 115
Click into the “Name” and insert the appropriate word(s) to describe the alarm typology.
Assign the alarm level procedure under “Level”.
Define the “Accumulation” time and the minimum activation time or “Delay” of the alarm.
Insert the appropriate message header into the corresponding fields.

To modify the item
From “Selection” find the desired item.
Change the wrong description.
Click on “Modify”.

To delete an item
Select the item to delete.
Click on “Cancel”.

To delete all the items of the list
Click on “Cancel All”;
Confirm the operation if necessary. Wait the screen refresh.

To reset the form
Click on “new”
3.3.3.8 QUEUED MESSAGES
XWEB can manage queued messages. This usually happens when there is a problem sending an alarm
message. The systems retries several times sending a messages, but when the queue is full the oldest
message is being deleted. Depending on the sending method these are the queues lenght:
Sending method lenght (number of alarms)
FAX 5
E-MAIL 10
SMS 10
Alarms sent by fax follow these rules: 3 retries, each retry after 3 minutes.
Once a message is deleted, XWEB put an entry in the Alarm Historical log.
3.3.4 DEVICE CONFIGURATION
The configuration of the devices allows to assign the appropriate
monitoring system attributes.
The configuration is subordinated to the manual or automatic search
procedure to create a list of the available instruments.
For each kind of instrument the XWEB will show only the peculiar
information of instrument itself and the attributes of the available digital
and analogue inputs of the instrument.
Only this part of configuration admits the association of the categories
previously defined such as the alarms, the commands and functions.
If during the configuration it is necessary to use a category to associate to
a new feature of the instrument but the category it is not present, the user
can step back into the Categories menu, create the new category and
then restart with the device configuration.
3.3.4.1 SELECT A DEVICE
From the Selection roll down menu find the appropriate one.
If the instrument has not been already renamed
the identification name will be: “xxx xxx_New_Model”
where:

xxx represents the serial address of the recognising procedure (Adr parameter);

“New” means that the name is still unassigned;

“Model” define the instrument model.
Instead of the string “xxx_New_Model” the user can insert the new appropriate name of that instrument.