dixell xweb 5000, Руководство по эксплуатации

Страница: 36 / 115

XWEB5000 Operation Manual
36/115 1592010600
It defines the time
table to send to the
instrument a Stand-
By command. The
display
of the
instruments shows
“OFF”. Regulation
and alarms are off,
too.
XWEB
continues to
monitoring probe
inputs, but alarm
reporting is turn off.
Please beware that “Time Band” ON means that a Stand-By command is send to the instruments, so the
instruments turns Off. On the contrary “Time Band” OFF, means that a Device ON command is send to the
instruments, so the instruments turns On.
Eg: define a “Standard Stand-by” Then “Time Band” 23:30 ON, the instrument turns OFF. Add “Time Band”
04:30 OFF, the instruments turns ON.

To insert a new item
Click into the field
“Name” and insert the word or the words that more represents the application;
The most common category should be set as “Default” by clicking into its box; It helps to save time for
most part of the instruments.
Click on “Insert”.

To modify an existing item
Select the item from the “Selection” list;
Change the “Name” description;
Click the “ Default ” if necessary;
Click on “Modify”. Wait the screen refresh.

To delete one of the item of the list
Select the item from the “Selection” list;
Click on “Cancel”;
Confirm the operation if necessary. Wait the screen refresh.

To reset all the items of the list
Click on “new”;
Wait the screen refresh.

To delete all the items of the list
Click on “Cancel All”;
Confirm the operation if necessary. Wait the screen refresh.

How to program the list of the Stand-by events
Click into “ Hour (hh:mm)” and then insert the hour and the minutes: then select “ON” or “OFF” to switch
on or off the instrument in that time.
Select the Calendar function if you need to schedule the events by calendar filtering.
If no Calendar function selected the operation is daily repeated.
Click on “Insert” to add the new event.
Repeat the procedure to fill the list of the daily events.

To change the time of the event
From the “Selection” menu find the appropriate item.
Then select from the “Time Band” the appropriate time.
Click into “ Hour (hh:mm)” and then insert the new hour and minutes
Click on “Modify”.
3.3.2.9 CALENDAR FUNCTION
The Calendar function is used to define if a function or a single event is active or not in the selected period of
time.
Therefore the Calendar is suitable to include/exclude certain period of the day, month or year when it has to
interact with some XWEB procedures or for instance if the maintenance personnel is working on the unit.
The resource (or any programmed procedure that the XWEB has to follows) related to a Calendar is available
“Enabled” only during the selected periods otherwise it is “Disabled” and it does not work.
The XWEB use the Calendar as filter before activating the resource itself, if the resource is not enabled in that