dixell iCHILL IC205D EVO, Краткое руководство пользователя

Страница: 10 / 42

1592015620 Quick reference guide iCHILL 200D EVO FW 4.5 rel. 1.0.doc 10/42
5. DISPLAY LAYOUT
Pressing Up or Down button the display shows the temperature or pressure of the main
probes configured in the instrument.
The lower display shows the label of the selected probe while the upper display shows its
value.
If the machine is configured with two gas circuits, when on the display is visualized the
condenser pressure/temperature or evaporation pressure of circuit 1, pressing SET button
the display shows condenser pressure/temperature or evaporation pressure of circuit 2.
Fig.1 Fig.2
6. OTHER DISPLAY INFORMATION
6.1 READ THE SET POINT VALUE
Press and release the SET key:
If the unit is on standby:
 lower display shows SEtC (set chiller);
 press SET key again, lower display shows SEtH (set heat pump, if it is enabled);
 press SET key again, lower display shows SEtr (set real of operation, in the case
where the Energy Saving and / or function dynamic set point are active);
 press SET key again, lower display shows SEtS (set domestic water circuit, in
case it is enabled)
If the instrument is in chiller operation:
 lower display shows SEtC (set chiller);
 press SET key again, lower display shows SEtr (set real of operation, in the case
where the Energy Saving and / or function dynamic set point are active);
 press SET key again, lower display shows SEtS (set domestic water circuit, in
case it is enabled)
If the instrument is in chiller operation: