Disty disty-guard, Руководство по эксплуатации

Страница: 22 / 28

disty-guard, operating instructions
Operating display
Operating status can be read on the LEDs.
Mode LEDs / Acoustic
1 Plug into charging station “Beep” tone, red LED illuminates once
2 Remove from charging station Abort charging: red LED goes off
3 Charging ( DECT activity on )
3
Red LED flashes during charging and turns off when
charging is completed
( Flash rhythm: every second )
Green LED as in 6) / 7) / 8)
4 Charging ( DECT activity off ) Red LED flashes during charging and turns off when
charging is completed
( Flash rhythm: every second )
Green LED is off
5 Charge status low Red LED flashes once in every 30 seconds and beep
tone
4
6 Subscribed, registered Green LED flashes once in every 10 seconds
7 Subscribed, out of range /
searching for base station
Red LED flashes every second
8 DECT connection Green LED is switched on
9 Alarm Red LED flashes once in every 0.5 seconds
10 Range ( Limit ) Red LED flashes fast. Warning tone
11 Status on delivery (Default),
Press of button
Red and green LED on
12 Programming through DTMF Green LED flashes
It is fixed in factory settings that DECT activity turns off when the disty-guard is in the CS.
If the device is configured in such a way that DECT operation is continuously active, the
meaning of the green LED during charging as stated in the above table will be maintained.
Moreover, the respective SMS is then sent to the control center while plugging into the CS or
removing from the CS.
If DECT activity is off, DECT operation will be stopped during charging. Moreover, no SMS
will be sent as described above.
3 depending on setting
4 Tone stops after 5 min.
Page 22 of 25