disty-guard, operating instructions
Call setup ( ASCOM only, with OAPT – interface )
Call
setup
SMS
: if a SMS with the content
(PTP)CS;A=12345;S=0
is sent to the
disty-
guard
, it calls the subsciber 12345.
With an additional parameter only the microphone is enabled. No optic/ acoustic
indication will be observed at the
disty-guard
, when a SMS with this parameter setting is
sent. Please use with caution!
•
(PTP)CS;A=12345;S=0 -> normal
•
(PTP)CS;A=12345;S=1 -> silent ( microphone only )
Setting through DTMF
Different parameters can be alternatively set with the help of the DTMF technology. Speech
contact is first established with the
disty-guard
for this purpose and the remote subscriber
sends the respective sign.
After recognizing the desired setting, in this case the introductory sign ‘**9’, a one-minute
countdown begins for the modification of the desired parameter.
Following successful programming, a positive acknowledgment tone will sound and the
connection will be terminated.
Only one parameter can be modified.
•
Authentication Code ( AC ) '
* * 9 pin 5 <ac> #
'
( ac = 0..9, 4-/ 8- digits )
•
Volume of loudspeaker
'
* * 9 pin 1 <Volume value> #
'
( Volume value = 1 .. 5 )
•
Volume of ringing tone
'
* * 9 pin 4 <Volume value> #
'
( Volume value = 1..2 )
•
Emergency call number
'
* * 9 pin 2 <Calling number>
1
#
'
( Calling number max. 20 digits )
•
Shock sensor
2
'
* * 9 pin 3 <Value> #
'
( Value = 0: Off,
1: Man down alarm,
2: Moved after timeout )
pin: 4 digits. Required only if it is not 0000.
1 1st number = * intern
→
al, = # extern
→
al number
2 Timeout = 2 minutes
Page 18 of 25
Содержание disty-guard
Страница 1: ...disty guard Operating Instructions Antibacterial version white Standard version black ...
Страница 26: ......
Страница 27: ......