Disty disty-guard, Руководство по эксплуатации

Страница: 14 / 28

disty-guard, operating instructions
Performance characteristics
( features )
Basically, the
disty-guard
is conceived in such a way
that an event is transmitted to a central instance as an
SMS message or speech connection is established with
a preset number. Both actions can also be combined.
This depends on one hand, on the application and the
infrastructure.
An event in this sense means press the button, insertion
into/ remove from charger or an incident due to the
acceleration sensor.
For setting or activation through ‘disty Programmer
App’, see preceding chapter.
Exchange of messages via SMS and the Beacon service are possible only during operation
with ASCOM facilities.
Emergency call ( default: disabled )
If the button is pressed for longer than 3 seconds in a normal state, a link will be established
with a programmed number; the red LED flashes. That is a speech connection.
This can be terminated only by pressing the button again.
The emergency call is set through
Function 10.
If a
disty-guard
is called, which has no emergency number set, then it stores the callers
identity ( CLIP ) as emergency number.
Announcement ( Call )
If a call is made through any random number, the
disty-guard
builds-up the connection
immediately. The loudspeaker and the green LED are switched on and a brief tone informs
the bearer that an audio connection has been established with the caller.
Volume
The volume of the loudspeaker can be adapted to Function 19 in 5 steps while that of the
ringing tone is adapted in 2 steps
Page 14 of 25