Disty disty-guard, Руководство по эксплуатации

Страница: 12 / 28

disty-guard, operating instructions
The App has the sheet “PC-COM” selected. This is the default after start of the program. On
this sheet the appropriate COM port should be selected via the drop-down list.
With the upper left button the APP starts into programming mode. The lower line, which
shows the hint and/ or status gives the command to insert the
disty-guard .
After the PS has recognized the
disty-guard
, the communication begins ( the LEDs of the
tag will blink ). The status line will light up in green color. The tool is ready for use!
Now you can choose the function or value you want to change.
As an Example: alarm number:
•
go to sheet 'Configuration 1'
•
write the appropriate number, which shall be dialed by pressing the alarm button,
into the field 'Alarm number'
•
initiate the transmission by clicking the 'write' button
Now the LEDs again start blinking to indicate the ongoing communication. At the end of
transmission we see the green status line.
Page 12 of 25