disperator EXCELLENT Series, Руководство пользователя

Страница: 23 / 33

23(33)
User manual in Original
Dok. ref: User manual 500A-BAS Rev. B
DISPERATOR AB Tel: +46 8 724 0160 E-mail: info@disperator.se
Mälarvägen 9, SE-141 71 Segeltorp, Sweden Fax: +46 8 724 6070 Web page: www.disperator.se
-01 Stationary shredder
-02 Rotary shredder
-03/00 Washer for V-ring seal
-03/01 V-ring seal
-03/02 Axle seal, with stainless spring, 2 pcs
-03/03 Locking ring, SgH
-05 Seal for stationary shredder
-06 Axle washer
-07 Axle screw
08 Seal for hood flange
-10 Key for carrier
-13 End shield
-14 Motor with drainage holes
-14/01 Axle seal, 1 pcs. motor drive side,
1 pcs. motor fan side
-14/02 Bearing, 1 pcs. motor drive side,
1 pcs. motor fan side
-14/03 Key for motor shaft
-15 Housing
-16 Hood
-17 Strap for housing
-18 Carrier
-22 Screw and nut for mounting the disposer,6 pcs
-23 Endshield mounting screw, 4 pcs.
-25 Nut and washer for hood assembly, 4 pcs
-26 Screw and washer housing assembly, 2 pcs
-29 Adjustable leg, 3 pcs. (520A-575A only)
-29/01 Screw for leg clamp, 3 pcs (520A-575A only)
Spare parts not shown in drawing
-04 Special grease for seals and carrier
-09 Rubber sealing compound
-28/V Torque protection bar for fixing disperator
to the wal /bulkhead
-31 Jam release wrench for rotary shredder
-35 Solenoid valve, ½” BSP, Female incl. coil, cable plug and
fixating washer
-36 Coil for solenoid valve
-37 Line strainer, ½” BSP, Female
-38 Start/stop unit including contactor with motor
overload protector
10. Service Instructions
10.1. Authority
Dismantling and assembly of the disposer to flushing water, drain pipe and electrical
services must be done by authorized personnel and in accordance to local regulations.
10.2. Exploded View of Disposer
ALWAYS STATE THE SERIAL NUMBER OF THE DISPOSER
WHEN ORDERING SPARE PARTS.
NOTE! All nuts and screws must have the correct
quality and strength.
Disperator can not guarantee the safety if other screws
than those ordered from us are used.