20(33)
User manual in Original
Dok. ref: User manual 500A-BAS Rev. B
DISPERATOR AB
Tel: +46 8 724 0160
E-mail: [email protected]
Mälarvägen 9, SE-141 71 Segeltorp, Sweden Fax: +46 8 724 6070
Web page: www.disperator.se
6.5.
Start Up and Final Testing
Before starting the disposer, secure the laminated operation and safety instructions (enclosed) to the
wall / bulkhead in a position where they are easily seen by the operator.
6.5.1.
Grinder Check
Switch off the current at the main electrical safety switch and lock it with a padlock or
a cable tie if you need to leave the disposer before you have completed section 6.5.
Check that the rotary shredder of the grinder in the inlet opening of the disposer
turns freely in both directions by hand, and make sure that no foreign object has
been dropped into the grinding unit during installation.
6.5.2.
Checks before Start Up
Start the disposer and determine that the rotary shredder revolves and that flushing water flows
automatically. Check assembly, flushing water connections and plumbing connections for possible
leaks.
6.5.3.
Final Mesures
If the disposer fails to operate, see section 9.3. ”Trouble shooting” in this manual.
Instruct the personnel responsible for the disposer in the kitchen/galley about the
operation of the disposer before handing over the remaining documentation and the
jam release wrench.
7.
Wiring Diagram
A wiring diagram and bill of material, together with a component layout, is delivered with the
disposer.
