DISCOVER 950-0025, Руководство пользователя

Страница: 14 / 28

14
5.2 Connecting LYNK II to the Sol-Ark Network
Before connecting LYNK II to the Sol-Ark network, ensure that all Sol-Ark devices
use COMM firmware version 1.4.3.0 or higher. Also, ensure that the CAN out pins
for LYNK II are configured correctly.
Insert one end of a CAT5 communication cable into the LYNK II CAN out port and
the other end into the correct CAN port of the Sol-Ark inverter charger.
NOTE
Ensure that all Sol-Ark inverters are using COMM firmware version 1.4.3.0 or
higher.
NOTE
There are different CAN port locations across Sol-Ark indoor (legacy) and
outdoor models.
L1 L2
PV1+ PV1- PV2+ PV2-
Load Out AC In/Out Gen In
50A 50A 50A
PV Input
DC Input
Batt Disconnect
Neutr
al
Gr
ound
L1 L2 L1 L2
CAN RS485
SOL-ARK BUS
Figure 6. Indoor Sol-Ark 8K Hybrid (Legacy)