Directus Prodigy ONE, Быстрый старт

Страница: 24 / 44

Quick Start Guide
Page 24
Radar / Laser Detectors
Prodigy ONE features and optional radar and laser detection system as well as a
laser diffuser accessory. If you have these features installed, Prodigy ONE has the
capability to enable or disable each of the radar band and laser coverages individually
as well as turning the system on only beyond a preset vehicle speed. This is useful in
many states to provide fewer false readings from coverage in a radar band that is not
used in your particular state or avoiding common false triggers at low speed (such as the
automatic doors at many grocery stores).
Please note that if you do have the Prodigy ONE radar/laser detection
accessory installed, you must have that accessory device enabled in the
UART menu by the installer at the time of the radar/laser device installation. For
more information on UART configuration, please see page 34.
Auto Radar Speed Settings
This feature can be turned on or off. If Auto Radar is turned on, the radar detection capabilities are not enabled
until the vehicle reaches the preset speed selected in the Auto Radar menu. The vehicle speed is determined
by the GPS signal and is very accurate.
From the main menu, choose the “Radar” icon to access the initial radar entry screen. Select whether you wish
to have Auto Radar ON or OFF. If you choose to have Auto Radar ON, you must also choose a vehicle speed
at which the unit becomes enabled. Once you have all your settings complete, choose “ Save ” and then “ OK ”
to confirm. Next, choose “ Exit ” to return to the main menu screen or “ Settings ” to select which radar band and
laser settings you wish to enable or disable.
WARNING : Radar detector systems are not legal for use on passenger vehicles in The State
of Virginia, Washington DC or on any US Military Base. Further, the use of radar detector
systems on commercial vehicles is prohibited in The States of New York, Illinois, and New Jersey.
Please check your own local and state laws to ensure compliance with radar and/or laser speed
detection devices.
If Auto Radar is set to the OFF position, the radar and
laser settings chosen in the radar’s “ Settings ” menu will
be available to indicate presence of radar and/or laser at
any vehicle speed, including while parked with the ignition
on. Remember to “ Save ” any changes before you exit this
menu.
If Auto Radar is set to the ON position, the menu button
turns blue to indicate the change and you can select your
trigger speed at which (and above) it turns on the radar and
laser detection enabling whichever settings chosen in the
radar’s “ Settings ” menu. Remember to “ Save ” any changes
before you exit this menu.
If Auto Radar is OFF If Auto Radar is ON
Remember
to SAVE any
changes!