background image

2

TABLE OF CONTENTS

TECHNICAL DATA

PHRVR96  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

INSTALLATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Mounting the Unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Location & Ducting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Air Flow Balancing   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

OPERATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Modes Of Operation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Optional Remote Controls  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

MAINTENANCE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

TROUBLESHOOTING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

ELECTRICAL CONNECTIONS   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....  15

The Best 
Limited Warranty 
in the Business

• The heat recovery aluminum core has a

limited lifetime warranty.

• The motors found in all Powrmatic HRV’s

require no lubrication, and are factory
balanced to prevent vibration and promote
silent operation.

• The limited warranty covers normal use.

It does not apply to any defects,
malfunctions or failures as a result of
improper installation, abuse, mishandling,
misapplication, fortuitous occurrence or
any other circumstances outside
Powrmatic’s control.

• Inappropriate installation or 

maintenance may result in the
cancellation of the warranty.

• Any unauthorized work will result in 

the cancellation of the warranty.

• Powrmatic is not responsible for any 

incidental or consequential damages
incurred in the use of the ventilation
system.

• Powrmatic is not responsible for providing

an authorized service centre near the
purchaser or in the general area.

• Powrmatic reserves the right to supply

refurbished parts as replacements.

• Transportation, removal and installation

fees are the responsibility of the purchaser.

• The purchaser is responsible to adhering

to all codes in effect in his area.

• The warranty is limited to 5 years on

parts and 7 years on the motor from the
date of purchase, including parts replaced
during this time period. If there is no
proof of purchase available, the date
associated with the serial number will be
used for the beginning of the warranty
period.

* This warranty is the exclusive and only

warranty in effect relative to the ventilation
system and all other warranties either
expressed or implied are invalid.

Sizing (Example) for maximum airflow normally required.

HRVs are typically sized to ventilate the whole house at a minimum of 0.35 air changes per
hour. To calculate, simply take the square footage of the house (including basement) and multi-
ply by the height of the ceiling to get cubic volume. Then, divide by 60 and multiply by 0.35.
Example:

SQFT of House

1100

Basement

1100

Total SQFT

2200

Height of ceiling

x   8

Cubic volume

17600

/ 60

Maximum airflow required (CFM)

293

x 0.35

103

* Always consult your local code for sizing requirements in your area.

Room classification

Number of rooms

CFM (L/s)

CFM Required

Master bedroom

x 20 cfm (10 l/s)

=

Basement

yes or no

=

Bedrooms

x 10 cfm  (5 l/s)

=

Living room

x 10 cfm  (5 l/s)

=

Others

x 10 cfm  (5 l/s)

=

Kitchen

x 10 cfm  (5 l/s)

=

Bathroom

x 10 cfm  (5 l/s)

=

Laundry room

x 10 cfm  (5 l/s)

=

Utility room

x 10 cfm  (5 l/s)

=

Total Ventilation Requirements

(add last column )

=

if yes add 20 cfm / 10 l/s

if no = 0

1 cfm = 0.47189 l/s

1 l/s = 3.6 m

3

/hr

Alternate Method

***Illustrations &

images in this 

manual may not be

exactly like unit 

purchase, these

illustrations &

images are for

examples only.***

Содержание PHRV

















Отзывы: