40
Restraint Cover
Removing restraint cover:
1. Unthread harness shoulder straps from back of restraint
(see page 36, adjusting harness height)
.
2. Remove fasteners securing
cover to inside of restraint
bottom. (Fig. 1-A)
3. Unhook fasteners securing
cover to front of restraint.
(Fig. 1-B)
4. Carefully remove upper
portion of cover from
restraint taking care not to
damage the white EPS foam
panels, and then remove
cover from bottom portion
of the restraint.
Replacing restraint cover:
To replace the cover, follow cover removal instructions in
reverse order. Make sure harness shoulder straps are
threaded through correct slots and that harness straps are
not twisted.
(See page 36, for changing harness height.)
1
A
B
WARNING:
Never remove buckle tongs or chest clip when removing and
replacing restraint cover. This is dangerous and NOT necessary
for removing or replacing the restraint cover.
Diono_CA_EN_RadianRXT_Manual_REBRAND 030416.indd 40
3/8/16 5:21 PM
