background image

27

Proper Buckle Position

Seat belt buckle should be correctly positioned on the 

outside of the lower belt guide.  If seat belt buckle is 

pulled across lower belt guide and into the restraint, this is 

incorrect and another seating position within the vehicle 

should be chosen.

6.  Fasten seat belt across child:  lap portion of seat belt 

should rest within both lower belt guides with buckle 

located on the outside of the restraint (Fig. 1).

7.  Place shoulder portion into the upper belt guide on the 

headrest so that belt lays properly across child: on collar 

bone, interior to the shoulder (Fig. 2).

  Periodically check to ensure your child has not moved 

out of position and loosened the shoulder belt.

8.  Make sure seat belt is not twisted and remove slack 

from seat belt so it lays flat, smooth and snug across 

child in all locations.

WARNING:

  If lap and shoulder belt portions of seat belt and 

seat belt buckle are not all correctly positioned, restraint is 

not properly installed as a booster.

1

2

Diono_CA_EN_RadianRXT_Manual_REBRAND 030416.indd   27

3/8/16   5:21 PM

Содержание Radian RXT

















































Отзывы: