32
Infant Support Cushion
1
This restraint features an aluminum reinforced head rest
lined with EPS foam for advanced side impact safety and
performance. Use of the head rest is NOT recommended
for newborns or smaller toddlers. When your child fits at
the third harness slot, the head rest may be used at its
lowest position.
Raise head rest:
Unfasten hook and loop tabs
located above and below the head
rest. Position hands under the very
back of the head rest, lift-up (Fig. 3).
Refasten hook and loop tabs.
Lower head rest:
Unfasten hook and loop tabs
located above and below the head
rest. Position hands on top of the
very back of the head rest, push
down. (Fig 4.) Refasten hook and
loop tabs.
Proper Height:
When using the top three harness
slots, position head rest so that
bottom edge is above the shoulder
and about level with the jaw. (Fig. 4)
When using the bottom two harness slots, position head
rest at its highest location.
Side Impact Head Support
4
Infant Support:
This restraint features a full infant
head and body support. (Fig. 1)
Fasten Velcro tabs through
harness slots to keep infant head
pillow in place. (Fig. 2)
2
Toddler Body Support:
Remove infant head pillow
and place body support
cushion in restraint for
toddlers. Body support lays in
seat and does not fasten.
3
Diono_CA_EN_RadianRXT_Manual_REBRAND 030416.indd 32
3/8/16 5:21 PM
