background image

14

1

Rear-Facing UAS Installation 

for children 2.3–20.5 kg (5 lbs – 45 lbs)

WARNING:

•  You must use restraint rear-facing if child is less than 1 

year and weighs less than 10 kg (22 lbs). Diono recom-

mends keeping children rear-facing until they are at 

least 2 years old.

•  Detachable base must be used with rear-facing restraint.
•  Do NOT use Safe Stop® with rear-facing child.
•  See page 42 for UAS connector instructions.

1.  Confirm detachable base is securely attached to 

restraint bottom (see page 13).

2.  Confirm vehicle seating location has its own UAS 

anchors (see vehicle owner’s manual).  If it does not, you 

must use vehicle seat belt for installation (see pages 16 

and 18).

3.  Locate UAS belt secured in storage compartment on 

restraint back.  Press red release button to remove each 

UAS connector and webbing. Slide the narrow UAS 

tethering strap out of plastic strap guides on side of the 

seat.

4.  Place restraint in proper 

rear-facing position:

Restraint bottom and base 

are both flat on the vehicle 

seat with front of restraint 

against the back of that 

vehicle seat.  (Fig. 1)

Note:  It may be necessary to 

move vehicle front seats 

slightly forward to properly 

fit a rear-facing restraint.

Diono_CA_EN_RadianRXT_Manual_REBRAND 030416.indd   14

3/8/16   5:21 PM

Содержание Radian RXT

















































Отзывы: