15
2
3
4
5. Route UAS belt through
rear-facing belt path.
Confirm UAS belt lays flat
and is not twisted. Attach
each connector to the UAS
anchor closest to each side
of the restraint. (Figs. 2 & 3)
UAS connector will ‘click’ to
confirm attachment to
anchor.
6. Push restraint down firmly
into vehicle seat while
tightening UAS belt.
(Fig. 4)
Vehicle cushions should
compress where there is
contact with car seat.
CHECK LIST:
Confirm restraint is properly positioned.
Confirm UAS belt is tight and that connections to
approved UAS anchors are secure.
Confirm restraint installation is stable (see page 25).
Stability of installation can be improved by using top
tether (see page 30 for tether instructions).
Removal:
• Press red release button on each UAS connector to
release it.
• Disconnect top tether if in use.
• Properly store UAS belt and top tether.
Diono_CA_EN_RadianRXT_Manual_REBRAND 030416.indd 15
3/8/16 5:21 PM
