Dionex ICS-90, Руководство по установке

Страница: 23 / 40

2 • Installing the ICS-90 System
Doc. 031856-03 12/06
19
4. If a “Cannot connect to timebase…” message appears, click OK to
close it.
NOTE If the timebase was named “ICS-90” when it
was created, the Control panel opens and
connects automatically to the ICS-90 timebase.
5. If the Control panel opens with the controls not yet active, connect the
ICS-90 to the Control panel by clicking the Connect button.
A dialog box appears (see Figure 2-11 ).
Figure 2-11. Connect to Timebase
6. Click the plus sign beside My Computer on the right side of the
dialog box and select the timebase you created in Section 2.5.1 . Click
OK to close the dialog box.
The controls on the panel are now connected