ICS-90 Installation Instructions
6
Doc. 031856-03 12/06
3. Insert the Chromeleon CD-ROM into the PC drive. The Chromeleon
Setup menu should appear.
If the Setup menu does not appear automatically, go to the Autorun
folder on the Chromeleon CD-ROM and double-click
autorun.exe
.
(The .exe extension is not always visible; it depends on the computer
settings.)
4. Select
Launch Chromeleon
Setup
.
5. Setup now guides you through the installation procedure; follow the
on-screen instructions as they appear.
6. When prompted whether to add the Server Monitor program to the
Startup group, select
Yes
if the computer will be physically connected
to devices or
No
if the computer will never be connected to devices.
When
Yes
is selected, the Server Monitor automatically starts when
the computer is started and the program icon is displayed on the
taskbar.
7. After installing the software, restart the computer.
8. Microsoft Windows should automatically detect the ICS-90 and
launch the Found New Hardware Wizard. (If this does not happen,
refer to the
Troubleshooting Tip
below.) Complete the wizard by
selecting the following options:
a.
If asked whether Windows can connect to Windows Update to
search for software, select
No, not this time
.
b. Accept the default option (
Install the software automatically
)
and click
Next >
.
c.
When the wizard reports that the software for the module has
been installed, click
Finish
.
Troubleshooting Tip
If a Microsoft Windows message box asks for the USB configuration file
(cmwdmusb.inf), it indicates that you connected the ICS-90 to the PC and
turned on the ICS-90 power before installing Chromeleon or Chromeleon
Xpress.
Follow these steps to resolve the problem:
1. Click
Cancel
in the Windows message box.
