CHECK LIST
7
PRESEASON CHECKS
❑
Check auger brake.
❑
Check tension of belts. Check all sheaves for correct alignment.
❑
Check all adjustable components for correct setting (blower and auger).
❑
Check tire pressure. See specifications.
❑
Check wheel bolts. They should be tighten to a recommended torque of 85 to 95 lbs/ft.
❑
Perform complete lubrication and servicing of the machine according to Servicing. Make sure all grease
fittings are in place and taking grease properly. Check transmission fluid levels if you have the option.
❑
Check transmission chain tension
❑
Look for loose or missing bolts and parts.
❑
Run the machine in a stationary position at half-speed for a short period of time. Shut off tractor engine.
Make sure all moving parts have stopped, then inspect bearings for over-heating, excessive wear, or
loose flanges and lock collars.
❑
Make sure the proper operating adjustments have been made.
❑
Make sure all shields are installed. Review Safety Precautions.
❑
Check for wear on parts (paddles, blower and auger bottoms, etc.).
❑
Make sure holes for the injection of water in the fan and the feed table are not obstructed.
DAILY CHECKS
❑
Check auger brake
❑
Remove all crop residue and wipe off oil and dirt.
❑
Lubricate and service the machine according to the Servicing section.
❑
Check chain and belt tension. Check all sheaves for correct alignment.
❑
Check tire pressure. See Specifications.
❑
Make sure Blower is hooked to tractor correctly, and that the safety chain is installed
securely. Make sure all controls are operable.
❑
Make sure that all shields are in good condition on the blower (with special attention to the driveline
shields).
Manual no. S5516E970
E
V1.1
