SAFETY RULES
12
PROCEDURES FOR STOPPING THE
FORAGE BLOWER
WARNING: To prevent personal injuries, do not
perform any kind of maintenance work while the
machine is running.
Before cleaning, adjusting, or greasing, the following
procedures should be followed to stop the Forage Blow-
er:
1. Disengage the tractor PTO.
2. Stop the tractor engine.
3. Set parking brake and remove the key.
4. Wait until all rotating movements have come to a
complete stop.
5. Remove the PTO chain.
6. Remove the driveline from the tractor output shaft
and attach it on its special support.
WARNING: Secure the PTO driveline to the sup-
port to prevent rotation of the fan or auger.
7. Block all equipment wheels.
GUARDS AND SHIELDS - FIGURE 2
The Forage Blower is equipped with guards and shields
at various locations. Observe the safety signs and follow
their instructions.
All guards and shields factory installed should be
in place and maintained in good condition.
1. The telescopic driveline which couples to the tractor
is covered with a rotating shield (item 1).
2. A hinged guard covers the driveline (item 2).
3. A hinged guard covers the belt mechanism, driving
the hopper auger (item 3).
1
3
2
4
Figure 2 Guards and shields
4. A hinged guard covers the main fan rear mechanism
(item 4).
Manual no. S5516E970
E
V1.1
