INSTALLATION
18
Figure 14 Align
Figure 15 Insert square lock pins
Figure 16 Square lock pin in place
7. Adjust the springs (item 1) by turning the screw
(item 2) sleeves (item 4) with the handle (item 3).
Two (2) balancing springs are required to operate
your attachment. Bolt the spring bracket (item 5) on
the attaching bar (item 6) as shown. Tighten bolt
(item 7) well then install both balancing springs.
8. Adjust the cylinder stroke to prevent the attachment
from touching the feed rolls.
Figure 17 Balancing springs set-up when using a Rotary Corn attachment
Manual No.F6418E996E
Содержание F64-90R
Страница 1: ...Manual No F6418E996E...