Dion-Ag F64-90R, Руководство оператора

Страница: 11 / 38

SAFETY RULES
11
TRANSMISSION SHAFT OPERATION
• POWER-TAKE-OFF DRIVE - Before starting the trac-
tor engine make sure that the PTO locking device is
properly engaged onto both the tractor and equipment
PTO shafts.
• Never wear loose clothing and keep people, especial-
ly children away from the PTO.
• Do not hook a 1000 RPM tractor on a machine
equipped with a 540 RPM drive and/or a 540 RPM
tractor on a machine equipped with a 1000 RPM drive.
• Never proceed to the starting of the machine before
making sure all PTO, machine and tractor, shields are
well installed in place.
• The PTO shields should turn freely, be well connected
and kept in good condition.
• Never step across any driveline.
• Never use the driveline as a step.
• Keep at least your height away from a rotating drive-
line
STOPPING PROCEDURES
No matter what type of machine is being used, it is ex-
tremely hazardous to perform any kind of maintenance
work while the machine is running. Before cleaning, ad-
justing, or greasing, the following procedures should be
followed to stop the attachment:
1. Lower the attachment to the ground.
2. Set the transmission to neutral.
3. Disengage the tractor power-take-off (P.T.O.).
4. Stop the tractor engine.
5. Engage the tractor parking brake.
6. Wait until all rotating parts are totally stopped.
7. Remove the P.T.O. from tractor output shaft.
8. Block all equipment wheels.
DANGER: Rotating driveline contact may
cause serious injury or death.
Manual No.F6418E996E