Dini Argeo TPW E-FORCE, Инструкция по эксплуатации и обслуживанию

Страница: 28 / 92

TPW
28
Packaging and handling
USER_MAN_ENG_TPWE-FORCE
Packaging
The pallet truck is transported fully assembled on a pallet and strapped to it.
Upon receiving the packaged machine, the customer must verify that there is no damage caused by the mode of
transport or by the personnel in charge of the specific operations.
If damage is detected
, leave the packaging in question in the state found and immediately request the assessment of
the damage by the competent shipping company, then communicate the damage found to the competent transport
insurance and sales outlet by means of a damage certificate.
Packaging handling
The packaging must be moved by means of a forklift with a capacity suitable for the weight to be lifted (refer to the
table below to check the weight of your model).
Weights with transport crate:
MODEL WEIGHT
TPWE-FORCE 135 kg
For handling, proceed as follows:
1. Place the forks of the forklift under the pallet to which the TPWE-FORCE is strapped.
2. Make sure the forks come out from the rear of the load, for a length sufficient to eliminate any risk of tipping.
3. Lift slowly, making sure that the centre of gravity of the section is positioned at the centre of the lifting forks.
Packaging disposal
The packaging is an integral part of the supply and is not collected, therefore the purchaser is in charge of disposing
of it.
IMPORTANT!
Dispose of the packaging in compliance with the regulations in force in the country of the user.