DINGLI BA14J-AWD, Руководство по эксплуатации и обслуживанию

Страница: 9 / 97

Operation & Maintenance Manual Section1-Safety Precaution
Dingli Machinery
1-3
Workplace Inspection

The operator is to take safety measures to avoid all hazards in the work area prior to
machine operation.

Do not operate or raise the platform while on trucks, trailers, railway cars, floating
vessels, scaffolds or other equipment.

Do not operate the machine in hazardous environments unless approved for that purpose
by Dingli.

Be sure that the ground conditions are able to support the maximum load shown on the
decals located on the machine.

This machine can be operated in temperatures of -20
℃
to 40
℃
. Consult Dingli for
operation outside this range.
Machine Inspection

Before machine operation, perform inspections and functional checks. Refer to Section 3
of this manual for detailed instructions.

Do not operate this machine until it has been serviced and maintained according to
requirements specified by the manufacture.

Be sure the footswitch and all other safety devices are operating properly. Modification of
these devices is a safety violation.
MODIFICATION OR ALTERATION OF AN
AERIAL WORK PLATFORM SHALL BE MADE
ONLY WITH WRITTEN PERMISSION FROM
THE MANUFACTURER

Do not operate any machine on which safety or
instruction placards or decals are missing or illegible.

Avoid any buildup of debris on the platform floor.
Keep mud, oil, grease, and other slippery substances
from footwear and platform floor.
1.4 OPERATION
General

Do not use the machine for any purpose other than positioning personnel, their tools, and
equipment.

Never operate a machine that is not working properly. If a malfunction occurs, shut down
the machine for troubleshooting.

Never slam a control switch or lever through neutral to an opposite direction. Always
return switch to neutral and stop before moving the switch to the next function. Operate