DINGLI BA14J-AWD Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 97

background image

Operation & Maintenance Manual

Section5-Operation Instruction

Dingli Machinery

5-2

are  variable  from  zero  to  maximum  speed  depending  upon  the  position of  the  control  lever.
Functions  controlled  by  toggle  switches  are  either  on  or  off.  A  foot  operated  switch  in  the
platform  must  be  depressed  before  any  controls  will  function  and  provides  a  means  of
emergency stop when the operator’s foot is removed from the footswitch.

The  machine  Lift  is  a  two  wheel  drive    or  four  wheel  drive  available  machine  with  drive
power being supplied by a hydraulic motor for each drive wheel. Each drive wheel is supplied
with  a  hydraulically  released,  spring-applied  brake.  These  brakes  are  automatically  applied
any time the Drive Control lever is returned to the neutral position

The unrestricted capacity of the machine is 230 kg. This means that with a platform load of
230 kg or less, the platform may be positioned anywhere the boom will reach.

5.2

Operating Characteristics and Limitations

Capacities

The boom can be raised above horizontal with or without any load in platform, if:
1)

Machine is positioned on a smooth, firm and level surface.

2)

Load is within manufacturer’s rated capacity.

3)

All machine systems are functioning properly.

4)

Proper tire pressure( for pneumatic tire).

5)

Machine is as originally equipped from Dingli.

Stability

Machine stability is based on two (2) conditions which are called FORWARD and
BACKWARD stability. The machine’s position of least FORWARD stability is shown in (See
Figure5-1.), and its position of least BACKWARD stability is shown in (See Figure 5-2.)

TO AVOID FORWARD OR BACKWARD TIPPING, DO NOT OVERLOAD
MACHINE OR OPERATE THE MACHINE ON AN OUT-OF-LEVEL
SURFACE.

«
...
53
54
55
56
57
...
»

Содержание BA14J-AWD


































































































Отзывы:

Нет отзывов

Похожие инструкции для BA14J-AWD

Бренд: Safeline Страницы: 8

Бренд: R. Beck Maschinenbau Страницы: 34

AUTOPULSE IQ-318

Бренд: Notifier Страницы: 62

Бренд: Nexus 21 Страницы: 24

Бренд: Skyjack Страницы: 47

Бренд: Acces Страницы: 17

Бренд: Zonex Страницы: 28

Бренд: MAGNAWELD Страницы: 18

Бренд: WARPP Страницы: 23

Бренд: DECA WELD Страницы: 56

Бренд: Fronius Страницы: 100

GrowControl GCX

Бренд: Agrowtek Страницы: 78

Бренд: Fronius Страницы: 148

Бренд: Elektra Beckum Страницы: 52

Бренд: DEVI Страницы: 2

Бренд: Jacuzzi Страницы: 28

Бренд: WAGO Страницы: 50

Бренд: Favero Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды