Dimplex I 22TU, Инструкция по установке и эксплуатации

Страница: 24 / 60

EN-10 452235.66.09 · FD 9209 www.dimplex.de
English
WI 10TU - WI 22TU
Type and order code
WI 18TU WI 22TU
1 Design
Heat source Water Water
1.1 model Universal Universal
1.2 Contr. WPM EconPlus WPM EconPlus
1.3 Thermal energy metering Integrated Integrated
1.4 Installation location Indoors Indoors
1.5 Performance levels 1 1
2 Operating limits
2.1 Heating water flow °C 20 to 62 ± 2 20 to 62 ± 2
2.2 Cold water (heat source) °C +7 to +25 +7 to +25
3 Flow / sound
3.1 Heating water flow at internal pressure differential
Nominal flow according to EN14511 at W10-7 / W35-30
m³/h / Pa
at W10-7 / W45-40 m³/h / Pa
at W10-7 / W55-47 m³/h / Pa
Minimum heating water flow m³/h / Pa
2,9 / 16200
2,7 / 14100
1,6 / 5100
1,6 / 5100
3,8 / 22900
3,6 / 20700
2,2 / 7700
2,2 / 7700
3.2 Cold water flow at internal pressure differential
Nominal flow according to EN14511 at W10-7 / W35-30
m³/h / Pa
at W10-7 / W45-40 m³/h / Pa
at W10-7 / W55-47 m³/h / Pa
Minimum cold water flow m³/h / Pa
4,0 / 15200
3,4 / 11200
3,3 / 10500
3,3 / 10500 5,3 / 21400
4,7 / 17100
4,0 / 12100
4,0 / 12100
3.3 Sound power level according to EN 12102
1
dB(A)
1. The specified sound levels apply if the supporting feet (available as an option) are not used. If the supporting feet are used, the level can deviate by up to 3dB(A).
44 47
3.4 Sound pressure level at a distance of 1 m
2 1
dB(A)
2. The specified sound pressure level corresponds to the operating noise of the heat pump in heating operation with a flow temperature of 35 °C.
The specified sound pressure level represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.
32 35
4 Dimensions, connections and weight
4.1 Device dimensions
3
H x W x D mm
3. Please note that additional space is required for pipe connections, operation and maintenance.
845
×
650 x 665
845 × 650 x 665
4.2 Weight of the transportable unit(s) incl. Packaging/full kg 160 179
4.3 Device connections for heating system Inches
4
4. Flat-sealing
Thread 1¼" external Thread 1¼" external
4.4 Device connections for heat source Inches
4 Thread 1¼" external Thread 1½" external
4.5 Refrigerant; total filling weight type/kg R410A/3,4
R410A / 4,0
4.6 Lubricant; total filling quantity type/litres Polyolester (POE)/1.2
Polyolester (POE) / 1,9
4.7 Volume of heating water in device Litres 4,5 5,6
4.8 Volume of heat transfer medium in device Litres 2,9 3,3
5 Electrical connection
5.1 Supply voltage / fuse protection Compressor
Primary circulating pump
Joint supply
Compressor and primary circulating pump
3~/PE 400 V (50 Hz) / C13 A
3~/PE 400 V (50 Hz) / C10 A
3~/PE 400 V (50 Hz) / C13 A
3~/PE 400 V (50 Hz) / C16 A
3~/PE 400 V (50 Hz) / C10 A
3~/PE 400 V (50 Hz) / C16 A
5.2 Control voltage / fuse protection 1~/N/PE 230 V (50 Hz) / C13 A 1~/N/PE 230 V (50 Hz) / C13 A
5.3 Degree of protection according to EN 60 529 IP 21 IP 21
5.4 Starting current with soft starter A 23 28
5.5 Nominal power consumption W10/W35/max. consumption
5
kW
5. These data indicate the size and capacity of the system according to EN 14511. For an analysis of the economic and energy efficiency of the system, the bivalence point and
regulation should be taken into consideration. These specifications can only be achieved with clean heat exchangers. Information on maintenance, commissioning and operation
can be found in the respective sections of the installation and operating instructions. The specified values, e.g. W10 / W35, have the following meaning: Heat source temperature
10 °C and heating water flow temperature 35 °C.
2,95 / 5,4 3,91/ 7,2
5.6 Nominal current W10/W35/cos A / -- 5,32 / 0,8 7,06 / 0,8
5.7 Power consumption of compressor protection
(per compressor)
W
thermostatically controlled thermostatically controlled
6 Complies with the European safety regulations
6
6. See CE declaration of conformity
6
7 Additional model features
7.1 Water in device is protected against freezing
7
7. The heat circulating pump and the heat pump manager must always be ready for operation.
Yes Yes
7.2 Max. operating overpressure (heat source/heat sink) bar 3,0 3,0
8 Heat output / COP
5
Heat output / COP EN 14511 EN 14511
Performance level 1 2 1 2
at W10 / W55 kW / --- 15,1 / 3,6 20,0 / 3,6
at W10 / W45 kW / --- 15,6 / 4,4 21,1/ 4,4
at W10 / W35 kW / --- 17,1 / 5,8 22,3 / 5,7