Dillenger CONVERSION KIT Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 27

Dillenger CONVERSION KIT Скачать руководство пользователя страница 21

21

Trouble Shooting

Dillenger’s troubleshooting advice will take you through a logical way to diagnose
any issues that may arise during installation and use.
Before commencing troubleshooting, disconnect all components. Do not short
cut this process. There are countless times a loose plug has caused grief. By
disconnecting all the plugs and then reconnecting just the crucial components, this
will solve any loose plug issue.

Go through one by one plugging in the other components (such as the PAS or the

e-brake handles) to see if any of these are the cause of the problem. In this basic
state you may discover the culprit quickly.

Fault

Solution

Display turns on, but

motor does not

Activate

Check the motor plug from the controller. This is a very stiff

connection and will not work unless the plug is all the way in to
the indicator line. The twisting of the handlebars can sometimes
cause the plug to pull out slightly if there is not enough slack in
the motor cable.

Motor runs backwards

Remove the motor from the frame and switch the direction.

Motor feels like it has

something caught

inside or some kind of

brake on inside

Remove the disk brake bolts completely and see if this remedies
the issue. If the disk brake bolts are too long, they will go too far
into the housing and fowl against the internals.

A high pitched rattling

noise can be heard

when accelerating

The vibration of the motor is very small, but at this frequency it
can do some odd things to the other components on the bike
if they are loose. For example a loose spoke or even a bolt on
your rear rack. If something is just a little bit loose, sometimes
this can reverberate and make a harsh high pitch rattling sound.
Nothing is broken or wrong, you just have to identify the loose
part!

Rim has a buckle or

spokes coming loose

all the time

We would recommend a competent wheel builder to fix any

major spoke tension issues, however there are some really good
youtube tutorials on how to adjust spoke tension.

Spokes have snapped

or missing

Dillenger stocks spare spokes for very reasonable prices, just

check out our spares section online and you can find the right

type and length for your kit.

«
...
19
20
21
22
23
...
»

Содержание CONVERSION KIT




























Отзывы:

Нет отзывов