Dillenger CONVERSION KIT Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 27

Dillenger CONVERSION KIT Скачать руководство пользователя страница 19

19

Charging

PLEASE NOTE

Only charge the batteries with the specified charger. Using a different

charger could damage your battery.

Charging the battery:

1. Plug the charger into the wall socket/outlet,
just like a laptop of mobile phone charger.
2. Check that one of the charger indicator
lights glows green
3. Plug the charger, (battery end) into the
battery carefully, making sure it is all the way
in. Do not force it if there is an obstruction.
4. The charger indicator lights should glow red
whilst charging.
5. Once the charger indicator lights change to
1 red and 1 green, the battery is fully charged.
There is no way to over-charge the battery.
When it is full, the charger will stop charging
the battery automatically.
Charging time can vary from 1 to 9 hours if
completely empty.
The battery should be charged once every
month as a minimum to maintain healthy
cells.
The best way to charge your battery is to plug
it in after every use, and leave it on charge
until the indicator light shows the battery is
fully charged. It is not good practice to only
half or partially charge the battery.

«
...
17
18
19
20
21
...
»

Содержание CONVERSION KIT




























Отзывы:

Нет отзывов