12
Display Install
Mounting the display is easy. The display should
be mounted to the clamp first, using two screws.
Next, remove the nuts and bolts from the clamp
and put the clamp on the handlebars.
There are rubber spacers included in the kit that
go inside the clamp depending on the thickness
of your handlebars. Now put the nuts and bolts
back into the clamp and tighten them securely.
Position the display so that it will be hassle free
to glance at during your ride.
The angle of the display can depend on the rider
style or the shape of the handle bars.
Attached to the Display is also a Pedal Assist
Controller. This Controller also has the On/Off
button on it.
The way this controller works is that it has a
number rating that will appear on screen. The
higher the number, the more that the motor will
assist with your riding, or pedaling.
This pedal assist controller should be slid on to
the handlebars on the side most preffered by
the rider and then tightened in a comfortable
position. This is shown in photo 2.
Tighten your brake lever in place, and do a
final check of all the controls that they are all
comfortable and tightened.
The grips can now be reinstalled to your
handlebars.