Release 1.05
Digium, Inc.
Page 31
Chapter 3: Telephone System Configuration
Clicking any of the tabs on the left of the page opens the heading to list a
brief explanation of what’s available in that section of the GUI, as well as
to add the options to the center section.
The middle of the GUI contains the primary content for each page. The
Home page is used for log on purposes, as well as saving configuration
changes, restoring the configuration defaults, and rebooting the hardware.
Save Configuration - Each time you make a configuration change on
a page those changes can be made active for the current session by
clicking Activate Changes in the upper right corner of the page. How-
ever, to save the changes permanently, you must return to the home
page and click Save Configuration.
Restore Default - This button gives you the ability to restore all set-
tings you have save to the factory default. Clicking this button will
remove any setup information you have previously saved.
Reboot - The Reboot button, as you may have guessed, reboots the
Asterisk Appliance.
The far right column of the GUI contains Tooltips. This area provides
explanations for any element of the GUI. To see a brief description of any
tab on the left, or of some menu elements in the center section, just mouse
over the item. The Tooltips section of the page will immediately populate
with a definition of the heading.
Above the tooltips section you will see the Activate Changes and Logout
buttons. These buttons appear in the upper right corner of every page.
Click Activate Changes to activate changes you have made on a page so
that you can utilize the changes. As noted above, these changes will not
become permanent until you have clicked Save Configuration on the
home page. Click Logout on any page to exit the Asterisk Appliance
interface.
