Release 1.05
Digium, Inc.
Page 27
Chapter 2: Unit Installation
Table 2: Wall Mounting
Step
Instructions for Wall Mounting
1
Select the area to mount the Asterisk Appliance unit
(refer to Figure 4 on page 26). The unit should be
mounted at or below eye level to properly view the
LEDs.
2
Use the two keyed insets on the bottom of the unit to
measure the exact distance between the two keyed insets.
3
Install two #8 PAN headscrews (1 1/2-inch or longer)
into the desired location on the wall (approximately
7 1/2-inch apart horizontally or vertically), making sure
they are level with each other.
4
Leave approximately 1/4-inch of the screw protruding
from the wall to allow the head of the screws to slide into
the keyed insets, mounting the unit to the wall.
