Digitus DN-70590, Руководство пользователя

Страница: 97 / 170

88
DTIM Period (4): Set the DTIM period of wireless radio. Do not modify
default value if you don’t know what it is, default
value is 3.
Data Rate (5): Set the wireless data transfer rate to a certain value.
Since most of wireless devices will negotiate with each
other and pick a proper data transfer rate automatically,
it’s not necessary to change this value unless you
know what will happen after modification.
N Data Rate (6): Same as above, but only for 802.11n clients.
Channel Width (7): Set channel width of wireless radio.
Do not modify
default value if you don’t know what it is, default
setting is ‘Auto 20/40 MHz’.
Preamble Type (8): Set the type of preamble,
do not modify default value
if you don’t know what it is, default setting is ‘Short
Preamble’.
Broadcast ESSID (9): Decide if the wireless router will broadcast its own
ESSID or not. You can hide the ESSID of your wireless
router (set the option to ‘Disable’), so only people those
who know the ESSID of your wireless router can get
connected.
CTS Protect (10):
Enabling this setting will reduce the chance of radio
signal collisions between 802.11b and 802.11g/n
wireless access points. It’s recommended to set this
option to ‘Auto’ or ‘Always’. However, if you set to
‘None’, your wireless router should be able to work fine,
too.