Digitus DN-70590, Руководство пользователя

Страница: 137 / 170

128
allow, only IP addresses listed in filtering table will be
able to connect to the network, and rejecting all other
network devices.
IP Filtering
All existing IP addresses in filtering table will be
Table (12): listed here.
Add PC (13):
Click this button to add a new IP address to IP filtering
table, up to 20 IP addresses can be added.
Please refer to section 3-3-1-1 ‘Add PC’ below.
Delete (14):
If you want to delete a specific IP address entry,
check the ‘select’ box of the IP address you want to
delete, then click ‘Delete Selected’ button. (You can
select more than one IP addresses).
Delete All (15):
If you want to delete all IP addresses listed here, please
click ‘Delete All’ button.
After you finish with all settings, please click ‘Apply’ (16) button and
the following message will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue
on other setup procedures, or click ‘Apply’ to reboot the router so
the settings will take effect (Please wait for about 30 seconds while
router is rebooting).
If you want to reset all settings in this page back to
previously-saved value, please click ‘Cancel’ button.
3-3-1-1 Add PC