User`s Manual
10/12
Settings
On this menu, many system parameters can be set. Please see below figure:
z
Beep:
The beep status during pressing keys or when the signal is locking. Press [
◄
/
►
] to turn on or turn
off beep
z
Auto Standby:
Set the time for meter to enter standby mode automatically. Press [
◄
/
►
] to switch
between Off, 10 min, 20 min, 30 min and 60 min
z
Language:
The language of UI. Press [
◄
/
►
] to switch between available languages
z
Factory Reset:
Press [OK] to display a confirm dialog. Then select YES to do a factory reset or select NO
to cancel.
z
Hardware Ver:
The version number of hardware
z
Software Ver:
The version number of software
TP Control
TP Control is short for transponder control. Press [F3] in Finder menu to enter this menu. It is very easy and
useful to check the output status of each port of Quattro LNB . Press [MENU] to exit to Finder menu. Please see below
figure: