User`s Manual
8/12
○
1 . Show the 22k status. –K: 22k off; 22k: 22k on
○
2 . Show the RF power output status. The values are: 13V, 18V and OFF
○
3 . The range of power level. And the range is 0 ~ 100
○
4 . The area that shows the spectrum chart
○
5 . The current frequency curse, press [
◄
/
►
] to set the current frequency.
○
6 . The start frequency of the spectrum chart
○
7 . The power level value of current frequency
○
8 . The end frequency of the spectrum chart
○
9 . The current frequency
○
10 . The current LNB type mode
Press [OK] button to check whether the current frequency can be locked or not. A dialog will show the locked
transponder once it locks. Please see below figure:
Constellation
Move the curse to Constellation icon and press OK to select satellite and transponder for constellation analyzer.
See the figure below:
○
1 . The current satellite, press [
◄
/
►
] to switch between satellites
○
2 . The current transponder, press [
◄
/
►
] to switch between transponders of selected satellite
○
1
○
2
○
3
○
5
○
4
