User`s Manual
5/12
○
2
. Transponder:
The current transponder. Press [
◄
/
►
] to
s
witch between transponders and press [OK] to enter
edit. Press [
◄
/
►
] to move curse and [
▲
/
▼
] to change value of each focused item in edit menu.
○
3
. LNB type:
The LNB type. Press [
◄
/
►
] to switch between LNB types and press [OK] to enter list to select type.
○
4 .
22K
: The 22k parameter. Press [
◄
/
►
] button to switch between Auto, Off and On.
○
5 .
PWR:
The power parameter of the LNB. Press [
◄
/
►
] button to switch between Auto, Off, 13v and 18v.
○
6 .
Diseqc 1.0/1.1:
The Diseqc port setting for Diseqc 1.0 and 1.1. Press [
◄
/
►
] button to switch between ports or
press [OK] button to select port in the list.
○
7 .
Motor type:
Set the motor type. Press [
◄
/
►
] to switch between Fixed, USALS and Diseqc 1.2.
USALS Setting:
Press [OK] to enter USALS SETUP menu on Position Type if the type sets to USALS parameters
z
Longitude:
The longitude of local. Press [OK] to enter edit mode, then press [
▲
/
▼
] to change the value
and [
◄
/
►
] to move curse. Press [OK] again to exit edit mode
z
Location:
The location of local. Press [
◄
/
►
] to switch between East and West
z
Latitude:
The latitude of local. Press [OK] to enter edit mode, then press [
▲
/
▼
] to change the value and
[
◄
/
►
] to move curse. Press [OK] again to exit edit mode
z
Hemisphere:
The hemisphere of local. Press [
◄
/
►
] to switch between North and South
z
Move to position:
Press [OK] to confirm to move to setting position
Diseqc 1.2 Setting:
Press [OK] to enter Diseqc 1.2 setting menu on Position Type if the type sets to Diseqc 1.2
