User`s Manual
3/12
F2:
Enable/disable deep when pressing keys
F3:
Unused with this product
F4:
Unused with this product
○
7 .
◄
/
►
:
Move focus or change value
.
▲
/
▼
:
Move focus or change value
○
8 . MENU:
Go into main menu or exit from the current menu
○
9 . OK:
Confirm
○
10 . :
Turn the meter on/off, press and hold for 2 seconds to power on the meter.
○
11 . Charging:
Connect with the charger cord for charging the equipment.
○
12 . Reset:
Reset the meter
How to measure
Connect the antenna to LNB INPUT port first.
Power on the meter, then FINDER menu will be show on the screen. Press [
▲
/
▼
] to switch between Satellite,
transponder, LNB type. Press [
◄
/
►
] to change the value of focused item. Press [OK] to edit value or enter the data list
to select. Please select the correct satellite which the signal cable is connecting to and the correct LNB type of your
current LNB antenna. Then switch between transponders to check the signal. The lock status, CNR, PWR, Strength
and Quality will be displayed on the screen.
Please refer below descriptions if you want to learn all functions.
Finder
menu
The meter will enter this menu first during power on. Press [
▲
/
▼
] to switch items and [
◄
/
►
] or [OK] to change
and edit value of each focused items.
○
1 .
Satellite:
The current satellite. Press [
◄
/
►
] to switch between satellites and press [OK] to enter satellite list
to select satellite. Press [OK] button to select the focused satellite and press [MENU] to exit from edit menu. All the
other parameters on the menu will be refreshed according to the selected satellite.
○
2 .
Transponder:
The current transponder. Press [
◄
/
►
] to
s
witch between transponders and press [OK] to
enter edit. Press [
◄
/
►
] to move curse and [
▲
/
▼
] to change value of each focused item in edit menu.
○
3 .
22k status:
The 22k current status.
○
4 .
LNB type:
The current LNB type. Press [
◄
/
►
] to switch between LNB types and press [OK] to enter list to
select type.
○
1
○
3
○
5
○
6
○
2
○
8
○
10
○
11
○
4
○
9
○
7
