Digitronic
CamCon Terminal
Automationsanlagen GmbH
DC51/T
Table of contents
1. Introduction .......................................................................................................................................... 3
2. Installation ............................................................................................................................................ 4
2.1. Dimensions ....................................................................................................................................... 4
3. Electrical connections .......................................................................................................................... 5
3.1. Pin allocation of the CamCon Terminal ............................................................................................ 5
3.1.1. Pin allocation of the voltage supply................................................................................................ 5
3.1.2. Pin allocation of the serial interface ............................................................................................... 5
3.1.2.1. Pin allocation of the serial RS232 interface ................................................................................ 5
3.1.2.2. Pin allocation of the serial RS485 interface ................................................................................ 6
4. Commisioning ...................................................................................................................................... 7
5. Operation of the CamCon Terminal..................................................................................................... 7
5.1. The main menu................................................................................................................................. 7
5.1.1. LCD - contrast setting .................................................................................................................... 8
5.1.2. Menu "1 Start Terminal"................................................................................................................. 8
5.1.3. Menu "2 Programme selection" ..................................................................................................... 9
5.1.4. Menu "3 Unit list"............................................................................................................................ 9
5.1.5. Menu "4 Terminal config."............................................................................................................ 10
5.1.5.1. Sub menu "Terminal konfig." .................................................................................................... 10
5.1.5.2. The communication mode or terminal mode (Ser.Mode) ......................................................... 10
5.1.5.2.1. The "Cam-BUS" communication mode.................................................................................. 10
5.1.5.2.2. The "Standard" communication mode ................................................................................... 11
5.1.5.2.3. The "Multiuser" communication mode ................................................................................... 11
5.1.5.2.4. The "S5 - L1" communication mode ...................................................................................... 11
5.1.5.2.5. The "3964R" communication mode ....................................................................................... 11
5.1.6. Menu "5 Terminal Language" ...................................................................................................... 11
5.1.6.1. submenu "device group" ........................................................................................................... 11
5.1.6.2. Submenü "Key code administration"......................................................................................... 12
6. Technical data.................................................................................................................................... 12
7. Key word table ................................................................................................................................... 13
1. Introduction
The CamCon Terminal DC51T is a graphic programming unit for cam controllers of the CamCon
family.
As a standard, the CamCon Terminal is equipped with background ilumination and an RS485
interface, but it can also come with an RS232 interface upon request. The CamCon Terminal is
connected to the cam controller via the serial interface and shows the transmitted data on its display
screen. The operation of the cam controllers is done as described in the corresponding handbooks.
This is the same for the devices of the CamCon series DC16/50/51/90/115/300 and differs only in the
performance of the different unit' s hardware.
The operation of the CamCon Terminal is described in chapter "5. Operation of the CamCon Terminal"
on page 7 .
Version: Jul. 04
Page: 3
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:[email protected]
Site web : www.hvssystem.com
