SYSTEM TEST
8
SYSTEM TEST
The system test is executed:
•
every switch on,
•
by pressed button on screen of any seed control mode
•
automatically by change settings of photosensors.
During test process the monitor detects:
•
which modules are connected to the system (photosensors, speed
module),
•
what is the readiness for operation of connected photosensors
(operability, dust level check),
•
Sends data to adjustable modules (DS2000).
Having the test finished, the ‘found’ modules are presented on display:
After photosensor test the seed blockage control screen appears.
After
simply switch on, the monitor is ready to control seeding blockage! This
function is available without entering any date.
See detailed description at
the CONTROL OF SEEDING BLOCKAGE
.
TEST
SENSOR
TEST
.........
* No photosensors!
1 2 3 4 5 6
1.50 sec
x
N
B
B
B
B
B
B
B
Operating sensor
N
dusty sensor
x
seeding blockage
TEST function may be used when there is
no seeding in progress!
un
successful test result
